CeBeCo® ROWAMAT® "DT"
Pipe washing system in continuous pulsing procedure
For linkage with sawing centres and end piece processing systems and available as single system
With operating capacities of up to 1,200 units/hour, depending on linkage and pipe dimensions
With minimum installation effort
Construction
The CeBeCo ROWAMAT “DT” (double drum) is made of thick, welded high-grade sheet steel. Designs or sizes according to customer-specific request are possible. Aqueous cleaners are used.
Equipment
Direct electrical heater, insulation, digital thermostat, high-pressure submersible pump, coarse filter insert, drying facility, vapour extraction, double drum with direct drive.
Supplementary features
Oil separator for non-emulsified oils in bypass mode, micro-filter in the main stream (surface filter), micro-filter in the bypass (depth filter), soil protection basin, loading stations (in various designs), drainage pump, weekly clock.
Types
TYPE DESIGNATION | RL 60 DT |
Pipe lengths (mm) | up to 600 |
Pipe diameter (mm) | from 8 - 34 or 10 - 60 |
View of the inside
View of the control panel
The illustrations on this page show also special equipment that are not included in the standard scope of delivery. The contents comply with the status at the date of publication (12/07). We reserve the right to implement changes to construction and equipment. Screen colours only reproduce an approximation of the actual colour hue. Surcharge for the displayed special equipment.